4 Technical data 4.2 Tightening specifications 2011 08000 Lube oil system 4 0312 1643 - 0138 10/14 © 11/2004 ID no. Name Pre- tightening value Re-tightening value Remark 07095 Charge pressure-dependent full load stop (LDA) on crankcase 22 Nm 07096 Cap on charge pressure- dependent full load stop (LDA) 8 Nm 07099 Fuel filter on fuel filter console 9 ± 1 Nm hand tight ID no.
Name Pre- tightening value Re-tightening value Remark 08001 Oil filter 10 -12 Nm • Oil gasket lightly • Screw on by hand and screw tight 08003 Oil filter console on crankcase 21 Nm Torx screw 08010 Lube oil pump on crankcase 22 Nm 08015 Oil suction intake pipe on crankcase 21 Nm • Note gasket coating • Sealant DEUTZ DW 73 08035 Pipe support oil dipstick guide pipe on oil pump 30 Nm 08042 Oil pressure line on: • Turbocharger • Crankcase 29 Nm • Renew CU sealing rings • Hollow screw • Before assembling the line ATL via pressure oil connection bore, pre-oil with approx. 1 cm³ engine oil!
08044 Oil return pipe on turbocharger 40 Nm Screwed socket Oil return pipe on turbocharger 8.5 Nm Flange socket 08046 Holder for stopper on crankcase 8.5 Nm FL/M engine Oil return pipe (ATL) holding plate on crankcase 8.5 Nm BFL/M engines 08047 Oil return pipe (ATL) on crankcase 29 Nm Hollow screw 08048 Oil line to (control line): • oil filter console • Crankcase 18 Nm • Injection adjustment • Renew CU sealing rings • Hollow screw