Deutz — Deutz 2011 Workshop Manual Level 3

4 Technical data 4.2 Tightening specifications 2011 4 0312 1643 - 0138 14/14 © 11/2004 ID no. Name Pre- tightening value Re-tightening value Remark 13016 Clamping bracket on console Generator 22 Nm • with built up fan drive • Unit design 21 Nm • with built up fan drive • Building machine design 13017 V-belt clamping bracket on front cover 45 Nm 13018 Generator console on cylinder head 34 Nm with in-built fan drive 13021 Pulley on generator 50 Nm Running wheel on generator 50 Nm 13022 Fan drive on generator console 30 Nm 120° • M10 x 110mm • with built up fan drive • Unit design 13031 Helical heater plug in: charge air line Suction pipe 60 Nm 13071 Charging current cable on starter max.

15 Nm 13081 Charging current cable on generator B+ 5.5 -7 Nm 13082 Cable G1.D+ on generator 4.5 ± 0.8 Nm 13083 Cable G1.W on generator 4 Nm 13092 Cable harness holder on crankcase 14 Nm Torx screw M8 x 16mm Cable harness holder on: Starter crankcase 8.5 Nm M6