Mack Trucks V-MAC IV — Mack Trucks V-MAC IV — спецификация (EN)

MID 140-PID 77 MID 140-PID 77 MID 140 PID 77 — FRONT REAR AXLE TEMPERATURE SENSOR FMI 5 Current Below Normal or Open Circuit Failure Mode Identifier (FMI): 0 (Data Valid But Above Normal Operational Range - Most Severe Level), 5 (Current Below Normal or Open Circuit), 6 (Current Above Normal or Grounded Circuit) Conditions for fault code: Open circuit Sensor resistance above 40 kOhm Parameter Identification (PID): P77 Possible causes: Faulty harness Message Identification (MID): 140 Faulty sensor Circuit Description: The axle temperature sensor is a thermistor. The resistance of the sensor changes inversely to the temperature of the axle oil.

When the axle oil temperature is cold, the sensor resistance is high. As the temperature of the axle oil increases, the sensor resistance decreases. The Instrument Cluster Module (ICM) monitors the voltage drop across the axle temperature sensor. Reaction from Instrument Cluster Module (ICM): Electronic malfunction lamp is illuminated Noticeable external symptoms: Gauge needle moves to zero position FMI 6 Location: The axle temperature sensor is located on the axle housing. Current Above Normal or Grounded Circuit FMI 0 Conditions for fault code:

Circuit shorted to ground Data Valid But Above Normal Operational Range - Most Severe Level Sensor resistance below 5 Ohm Conditions for fault code: Possible causes: Temperature over warning threshold Faulty harness Axle temperature above 240°F (120°C) Faulty sensor Possible causes: Reaction from Instrument Cluster Module (ICM): Faulty harness Electronic malfunction lamp is illuminated Faulty sensor Noticeable external symptoms: Reaction from Instrument Cluster Module (ICM): Gauge needle moves to zero position Red lamp is illuminated Noticeable external symptoms: N/A Page 122 MID 140-PID 77