Mack Trucks V-MAC IV — Mack Trucks V-MAC IV — спецификация (EN)

MID 144-PPID 72 MID 144-PPID 72 MID 144 PPID 72 — OUTPUT SUPPLY #1 FMI 4 Voltage Below Normal, or Shorted To Low Source Failure Mode Identifier (FMI): 3 (Voltage Above Normal, or Shorted To High Source), 4 (Voltage Below Normal, or Shorted To Low Source) Conditions for fault code: Abnormally low voltage or short circuit to ground Parameter Identification (PPID): P72 Voltage below 4.7 volts Message Identification (MID): 144 Possible causes: Circuit Description: The Accelerator Pedal Position (APP) Sensor is a potentiometer that is mechanically linked to the accelerator pedal.

When the accelerator pedal is depressed during normal operation, the Accelerator Pedal Position (APP) Sensor signal voltage to the Vehicle Electronic Control Unit (VECU) increases. The Vehicle Electronic Control Unit (VECU) monitors the Accelerator Pedal Position (APP) Sensor signal voltage and uses the signal to calculate engine fuel requirements. Accelerator Pedal Position (APP) harness shorted low Accelerator Pedal Position (APP) sensor Reaction from Vehicle Electronic Control Unit (VECU): Yellow lamp is illuminated Noticeable external symptoms: Engine will not supply requested fuel to engine Location: The Accelerator Pedal Position (APP) Sensor is part of the Accelerator Pedal Assembly.

Engine brake retarder is disabled FMI 3 Voltage Above Normal, or Shorted To High Source Conditions for fault code: Abnormally high voltage or short circuit to higher voltage Voltage above 5.7 volts Possible causes: Accelerator Pedal Position (APP) harness shorted high Accelerator Pedal Position (APP) sensor Reaction from Vehicle Electronic Control Unit (VECU): Yellow lamp is illuminated Noticeable external symptoms: Engine will not supply requested fuel to engine Engine brake retarder is disabled Page 161 MID 144-PPID 72