Mack Trucks V-MAC IV — Mack Trucks V-MAC IV — спецификация (EN)

MID 128-PPID 270 MID 128-PPID 270 MID 128 PPID 270 — NOx SENSOR Reaction from Engine Management System (EMS) Module: Failure Mode Identifier (FMI): 2 (Data Erratic, Intermittent or Incorrect), 3 (Voltage Above Normal, or Shorted To High Source), 5 (Current Below Normal or Open Circuit), 9 (Abnormal Update Rate), 10 (Abnormal Rate of Change), 12 (Bad Intelligent Device or Component), 13 (Out of Calibration), 14 (Special Instructions) MIL lamp illuminated Noticeable external symptoms: N/A FMI 5 Current below normal or open circuit Parameter Identification (PID): P270 Conditions for fault code: Message Identification (MID): 128 Open Circuit, NOx signal Possible causes:

FMI 2 Faulty cabling between NOx sensor and NOx sensor ECU Data erratic, intermittent or incorrect Conditions for fault code: Faulty NOx sensor NOx sensor removed Reaction from Engine Management System (EMS) Module: Plausibility Possible causes: MIL lamp illuminated NOx sensor removed (measures surround air) Noticeable external symptoms: Exhaust system leakage N/A Air intake leakage FMI 9 Faulty NOx sensor Abnormal update rate (missing sensor signal Reaction from Engine Management System (EMS) Module: Conditions for fault code: Abnormal update MIL lamp illuminated Possible causes: Noticeable external symptoms:

Missing signal from NOx sensor MIL lamp illuminated Reaction from Engine Management System (EMS) Module: FMI 3 Voltage above normal or shorted to high source MIL lamp illuminated Noticeable external symptoms: Conditions for fault code: Short Circuit, NOx signal N/A Possible causes: Faulty cabling between NOx sensor and NOx sensor ECU Faulty NOx sensor Page 53 MID 128-PPID 270