Reaction from Engine Management System (EMS) Module: FMI 14 Special Instructions MIL lamp illuminated Conditions for fault code: Noticeable external symptoms: Lost Flame Ceased regeneration Manual regeneration not possible FMI 4 Possible causes: Voltage Below Normal, or Shorted To Low Source Ignition wire connection to igniters and ignition coils Conditions for fault code: Flame temperature shorted low Faulty Fuel Nozzle Possible causes:
Faulty fuel pump supply, valve and fittings Faulty electrical harness between Flame Temperature Sensor and Cold Junction Compensation Board Faulty Ignition Coil Faulty Combustion Air Solenoid Faulty Supplemental Air Valve Faulty electrical harness between Cold Junction Compensation Board and Aftermarket Treatment System Control Module Faulty Combustion Line Check Valve Faulty Atomization Module Faulty Flame Temperature Sensor Faulty Flame Temperature Sensor Faulty Aftermarket Treatment System Control Module Faulty Cold Junction Compensation Board Faulty Aftermarket Treatment System Control Module Reaction from Engine Management System (EMS) Module:
MIL lamp illuminated Reaction from Engine Management System (EMS) Module: MIL lamp illuminated Noticeable external symptoms: Aborted regeneration Noticeable external symptoms: Ceased regeneration Page 69 MID 128-PPID 440