MID 128-PSID 57 MID 128-PSID 57 MID 128 PSID 57 — THERMAL REGENERATION UNIT (TRU): BATTERY VOLTAGE Reaction from Engine Management System (EMS) Module: MIL lamp illuminated Failure Mode Identifier (FMI): 0 (Data Valid But Above Normal Operational Range - Most Severe Level), 1 (Data Valid But Below Normal Operational Range - Most Severe Level), 3 (Voltage Above Normal, or Shorted To High Source), 4 (Voltage Below Normal, or Shorted To Low Source) Noticeable external symptoms: Aborted and ceased regeneration FMI 3 Voltage Above Normal, or Shorted To High Source Parameter Identification (PSID): P57 Conditions for fault code: Message Identification (MID):
128 Battery voltage too high FMI 0 Possible causes: Battery voltage too high Data Valid But Above Normal Operational Range - Most Severe Level Faulty Aftermarket Treatment System Control Module Conditions for fault code: Battery voltage too high Reaction from Engine Management System (EMS) Module: Possible causes: MIL lamp illuminated Battery voltage at or above 16 volts Noticeable external symptoms: Faulty Aftermarket Treatment System Control Module Aborted and ceased regeneration FMI 4 Reaction from Engine Management System (EMS) Module: Voltage Below Normal, or Shorted To Low Source MIL lamp illuminated Conditions for fault code: Noticeable external symptoms:
Battery voltage too low Aborted and ceased regeneration Possible causes: FMI 1 Battery voltage too low Data Valid But Below Normal Operational Range - Most Severe Level Faulty Aftermarket Treatment System Control Module Conditions for fault code: Reaction from Engine Management System (EMS) Module: Battery voltage too low MIL lamp illuminated Possible causes: Noticeable external symptoms: Battery voltage less than 8 volts Aborted and ceased regeneration Faulty Aftermarket Treatment System Control Module Page 76 MID 128-PSID 57