MID 128-PSID 59 MID 128-PSID 59 MID 128 PSID 59 — THERMAL REGENERATION UNIT (TRU): ATOMIZATION AND COMBUSTION AIR SOLENOIDS FMI 4 Voltage Below Normal, or Shorted To Low Source Conditions for fault code: Atomization and combustion signal low Failure Mode Identifier (FMI): 3 (Voltage Above Normal, or Shorted To High Source), 4 (Voltage Below Normal, or Shorted To Low Source) Possible causes: Parameter Identification (PSID): P59 Faulty electrical harness between Air Atomization Module and Exhaust Aftertreatment System Control Module Message Identification (MID):
128 Faulty electrical harness between Combustion Air Solenoid and Exhaust Aftertreatment System Control Module FMI 3 Voltage Above Normal, or Shorted To High Source Faulty Air Atomization Module Faulty Combustion Air Solenoid Conditions for fault code: Faulty Exhaust Aftertreatment System Control Module Atomization and combustion signal high Reaction from Engine Management System (EMS) Module: Possible causes: Faulty electrical harness between Air Atomization Module and Exhaust Aftertreatment System Control Module MIL lamp illuminated Noticeable external symptoms:
Faulty electrical harness between Combustion Air Solenoid and Exhaust Aftertreatment System Control Module Aborted and ceased regeneration Faulty Air Atomization Module Faulty Combustion Air Solenoid Faulty Exhaust Aftertreatment System Control Module Reaction from Engine Management System (EMS) Module: MIL lamp illuminated Noticeable external symptoms: Aborted and ceased regeneration Page 78 MID 128-PSID 59