. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE WARNING engine or coolant leakage from the cooling system. If any problem is 3 - 71 WALK-AROUND CHECK engine, look around the machine and under the machine to check for loose nuts or bolts, or or coolant, and check the condition of the hydraulic system. Before starting the leakage of oil, fuel, or coolant, and check th e condition of the hyd Check also for loos e wiring, play, and accumulation of dust in place s that get very hot and a re exposed to extremely high temperatures. Always hang the w arning tag from the shift le ver.
Leakage of oil or f uel, or accumulation of flam mable material around th e battery or high temperatu re parts of th e engine, s uch as the engine muff Komatsu distributo ler or turbocharger, may ca use fire. Check carefully , and if any problem is foun d, repair it o r contact y our r. Always carry out th e following items before starting the engine ea 1. Check the dum p body, frame, tires, cyli nders, linkage, and ho ses for cracks or excess ive wear o r play. Check the dump bo dy, frame, tires, cylinder s, linkage, and hoses fo r cracks or excessive we ar or play, and carry out repairs if any probl em is found. 2. Remove dirt fro m around engine, batter y, radiator, and afterco oler.
Check that there is no dirt or dust accumula ted around the engine , radiator or aftercooler. Check also that ther e is no flammable mate rial (dry leaves, twigs, et c.) accumulated aroun d the battery, or engine, muffler, tur bocharger , or other high tempera ture parts of the engine. Remove any dirt or fla mmable materials that a re found. 3. Check for leaka ge of water or oil aroun Check that there is found, repair it. 4. Check for oil lea tank, hoses, an 4. Check for oil lea kage from transmission case, differential case , final drive case, hydrau lic tank, bra ke contro l oil d joints no oil leakage. If any problem is found, repair the place where the oil is leaking.
of oil from the undercover. Check the ground for traces of oil leakage. Check that there is no oil leakage. If any pr oblem is found, repair the place where the oil i Check for leakage of oil from the undercov er. Check the ground f or traces of oil leakage. 5. Check for loose air cleaner mounting b Check for the loose bolts. If loose, tighten t 6. Check dump bo Check for any crac ks, embedded foreign o 7. Check for dam age to handrail, loose bo Repair any damage and tighten any loose 8. Check for dam age to gauges, lamps on the instrument panel and loose bolts. Check for damage to the panel, gauges and lamps. If any problem is found, replace the pa rts. Clean off any dirt on the surface.
Tighte n any loose bolts.