Komatsu — OTHER TROUBLE

. OPERATION TROUBLESHOOTING IF ACCELERATOR PEDAL HAS FAILED the central 3 - 137 In additi on to the potentiome ter detecting the pedal depression depth, the switc h (check switch) is installed on the acceler ator pedal assembly i n order to de tect whether the a ccelerator pedal is depressed or no If the pe dal depression depth is not detec ted correctly due t o a failure of the accelerator pedal o r incorrect electric wiring, t he engine controller c ontrols the e ngine speed responding to t he signal f rom this check s witch. The engine runs at 1500 rpm when the accelerator p edal is depresse uns ow the edal is release d. The engine speed varies depen ding on the l oad.

After us ing th e edal Komats u distributor. There a re two methods whe he accelerato r pedal: either r elease idle), or depress t he pedal fu lly (1500 rpm If the ac celerator pedal is he ld at an inter mediate position, the system pedal is being operated or no e pedal (check switch is OFF, low not be able to judg e if the accelerator REMARK If the en cann signa the edal depth warning lamp flashes and si multaneously the alarm buzzer sounds an d user code 02 appears.