Komatsu — CHECK WEAR OF PARKING BRAKE PADS

. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF PARKING BRAKE WARNING NOTICE position. CHECK WEAR OF PARKING BRAKE PADS WARNING 4 - 54 If the machine moves, it will lea d to serious injury or death. If machi ne begins to move during the in spection of braking ca pacity lowe r the engine speed immedi ately, set gear shift lever at N positi on, and then depress the foot b Check the braking capacity of the parking brake as f ollows. Stop the machine on fla 1) to PARKING. Set shift lever (2) to the t ground and set parking brake switch D position, gradually raise the engine speed.

If the machine speed reaches 1400 rp Lower the engine spee does not move even when the engine m, it is normal. d, set gear shift lever at N position. If any problem is found, a sk your Komatsu distributo r for r epair. Ther e is danger of damage insi de the transmission, so always do thi s with t he shift lever at the "D" p osition. Do not use an y other Neve r put any oil or grease on the surface of the pad or disc. Measure the thickness of th e pad, and if it is less than 1. 5 mm (0.06 in), c ontact your Komatsu d