Komatsu — OPERATION OF SWITCHES

. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER HM METHOD OF CARRYING OUT CALIBRATION (METHOD OF OPERATION) switch (1) pressed for at least 2 seconds. (The letters CAL flash) 2. Press CAL/CLR switch (1) again. (Letters CAL light up.) 5. Stop return the gearshift lever to N . Use the 6 - 19 1. Move the gearshift lever to the N position and keep CA 3. Shift t nd travel in a strai ght line. When th e travel speed 9 km/h (5.6 MPH) , the elapsed time is displayed. 4. The pr esent payload me asurement value i s displayed 3 0 seconds afte r carryin g out calibratio completely g brake. Release the foot brake or r etarder brake 6.

If the d ump body is empty , the measureme ntvalue for the payload is measureda s approx. 0.0 to ns. If more than ±1 ton s is displayed for t he payload, carry out calibratio n travel again. 7. Press the MODE switch. The display cha nges to the n ormal operation display NOTICE Carry ou t the calibration on a flat road surface w ith no uneven places. The flatte r the roa d surface is, the more accurate the measure ment becomes. tance: Approx. 120 m (393 ft 8 in)) alibration accurately. If calibration is not carried out accurately, there will be an error in the so the measurement will not be correct. 2 and depress the accelerator pedal fully. Do not let the accelerator pedal back.

Travel in a straight line. (Dis tance: Approx. 120 Be caref ul to carry out the c alibration accuratel y. If calibratio measure ment of the payload, so the measuremen t will not be co Shift the gear shift lever to F 2 and depress the ac celerator peda l fully. Do n ot let the accelerator pedal bac The calib ration data are saved to the internal RAM . After calibrati on is being c arrie d ou t, eve n if the power is t urned off, the data are retai ned. If it is de sired to stop the calib ration during the ca libration operat ion, press th e MODE switc h while the letter s CAL are flashing in Step 1 . The display will ch ange from CAL to th e normal displ ay.

If an erro roccurs on the mach ine, depending on th e error,it may be impossibl e to c arry out c alibration. For d etails, see Section "ABNOR MALITY AND WARN ING DISPLAY (ERRO R CODE) (PAG E 6-30)"