Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS AISS LOW SWITCH Regardless of the position of the switch, when the differential lock is pilot lamp lights up. 3 - 36 If the switch is at AUTO p osition: chine, if the parking brake or retarder idling is automatically adjusted to low the machine, if the parking brake is utomatically adjusted to high-speed.

When stopping the ma retarder brake are operated, the speed; when starting canceled, the idling is a idling is automatically adjuste d to low the machine, if the parking brake is utomatically adjusted to high-speed The water temperature is detected, and when it is at lo w temperature, the idle is automatically adjusted to high speed to reduce the wa rming-up time. between AUTO and LOW. Use each position as follows. (a): AUTO position When working at night, the symbol inside the switch lights up regardless of the selected p osition of th e switc INTER-AXLE DIFFERENTIAL L OCK SWITCH This switch (10) can be us ed to switch the actuating conditions for the inter-axle differential lo ck.

When this switch is presse d, the system is switched to M ANUAL. When the switch is not p ressed or is pressed to return it, the O. the system is switched to AUT AUTO: The slippage of the front axle is detected and the in ter-axle differential lock is a utomatically actuated. lever is at the F3, F2, F1, N, R1, or R2 er-axle differential lock is actuated. MANUAL: When the shift R2 position, the int er-axle differential lock is actuated. lock is actuated, the differenti al lock When working at night, the symbol inside the switch lights up regardless of the selected p osition of th e switc For details when using the differential lock, see "OPERATION USING DIFFERENTIAL L OCK (PAGE 3-102