. OPERATION OPERATION CHECK COOLANT LEVEL, ADD WATER WARNING REMARK problem. It occurs because too much coolant has been added. 2. After adding coolant, tighten the cap securely. 3 - 70 Normally , do not open the radiato r cap. When checking the cooling water level, check the sub-tan k when the engine is cold. D o not re move th e cap whe n the ra diato r water is hot. Boiling water may spurt out. After the water te mperature goes down, turn th e cap s lowly to release t he pressure, then remove 1. Open t he engi ne side cover o n the lef t side of the chassis, and heck that the coolant is between t he FULL an d LOW marks on ub-ta nk (1).
I f the wa ter lev el is low , add water the ULL evel th rough t he wate r filler p ort i n sub-tank ( 1). The coolan t may o verflow from th e sub-tank drain hose. This i s no 3. I f the s ub-tank is empt y, chec k for leakage of c oolant , then add t to th e radiat or and s ub-tank 4. After a dding w ater, clo se the engine side cover.