Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION REMARK When inspecting, if the machine is at an angle, move it to a horizontal place to carry out the check. 3 - 74 CHECK OIL LEVEL IN POWER TRAIN CASE, ADD OI 1. Remove dipstick (G) , and wipe the oil off with a 2. Completely insert d emove it and check 3. Check that the oil l dipstick (G). f the oil level is belo iller (F). The dipstick has tw STOP for use whe oil emperature is low; a nd HOT IDLE for use whe n the engin e is dling and the oil tem REMARK When checking the oi l level with the engine stopped before Whe starting operations, chec k the oil level with the side marked COLD STOP.

It is also possibl e to check the oil level eve n after starting operations when the pow er train oil temperature is high, but i n this case, run the engine at idling and use th e side marked HOT IDLE. 4. I f the oil is above the H line, remove drain cove r (1) at the left s ide at the bottom su rface of the power train case , pull out d rain hose (2) from the tak e-out port, loosen drain plu g (3), drain the excess oil, then che ck the oil level again. securely. 5. I f the oil level is corr ect, tighten the oil filter cap