Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING may lead to REMARK at an angle, move it to a 3 - 76 When remo ving the oil filler cap, oil m ay spurt out, so sto p the e ngine and wait for the oil temperature to go d own, then turn the c ap slo wly to release the internal pressure before re If oil has be en added to above the H m ark, stop the engine and w ait for the hydraul ic oil to cool down. Then re move drain plug (P), loosen drain valve (1), an 1. Lower th e blade and ripper comp letely to the ground, sto p the ait for approx. 5 minutes , then check that the oil level en the H and L marks on sight gauge (G).

NOTICE If the oil level is above the H line, do not add oil. Doing so If damage to the oil pressure circuit and sp outing out of oil. 2. If the oil l evel is below the L line, add oil through oi l filler (F) at the top o f the hydraulic tank. When inspe horizontal pl ace to carry out the chec