Komatsu — STARTING ENGINE

. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING particularly careful to ensure good ventilation. to make the engine speed slightly 3 - 86 Start the engine only after sitting down in the o perator 's seat . Do not att circuit. S empt to start the e uch an act may ca ngine by short-circuiting th use serious bodily injury or e engi fire. ne starting Check th then sou at there are no pe nd the horn and st rsons or obstacles in the surrounding area, art the engine. Exhaust gas is toxic. When starting the engine in confined spaces, be NOTICE Do not cr ank the starting m otor continuously fo r more t han 20 seconds.

If the eng ine does not start , wait for at least 2 minutes , then repeat the procedur e from Step 2. Before st arting the engine, check that the fuel control dial is at the l ow idling (MI N) position. On this m achine, to protect the turbocharger, a turbo pr otect f unctio n is provided. In cold weathe r, even if fuel cont rol dial (1) is operated immediat ely after starting t he engine, the engin e speed may n ot change for sever al seconds. If the fuel control dial is at t he FULL position, t he engin e will accelerate suddenly and cause dam age to the engine parts, so set it to an position. to an intermedi ate or low speed 1. Set fu el control dial ( higher than low idling. 2.

Turn th e key of ignition switch (2) to the STAR T position.