. OPERATION TRANSPORTATION TRANSPORTATION LOADING, UNLOADING WORK WARNING 1st, and drive 3 - 130 When transporting the machine, observe all related laws and regulations, and be careful t o assure s Use ramps with ample width, leng th, and thickness to allow safe loading and unloadi If the ramps bend excessively, rei Select firm, level ground when loa Maintain a safe distance from the Remove all mud and dirt from the machine tracks in order to prevent the machine fro m slipping o n the ramps Be sure that the ramp surface is c On the ramps, run the engine at lo Never correct your steering on the ramps. If it is necessary to change direction, drive off the ramp s and corre ct the direction.
Never use counterrotation turns. When loading or unloading, alwa ys use ramps or a platform and carry out the operations as follows. 1. Properly apply the brakes beneath the tires to ensure t ramps in line with the center 1. Properly apply the brakes 2. Decide the direction to trave l on the ramps, place the steering, direction, machine. n the specified position on the trailer. slowly to load or unload the 3. Load the machine correctly i PRECAUTIONS FOR LOA DING specified position of the trailer, secure it according to the following procedure. owly. e safety lock lever. OCK position. e OFF position, stop the engine, and take out the key.
ght engine side covers, and the battery inspection cover. ine, place wooden blocks under the front and rear track shoes to prevent the After placing the machine on the specified position of the trailer, secure it acco rding to the following procedure. 1. Lower the work equipment sl 2. Secure control levers with th 3. Set the parking lever to the L 4. Turn the starting switch to th 5. Lock the cab door, left and ri 6. When transporting the mach machine from moving. Also, to ensure that the machine d 1. Lower the work equipment sl 2. Secure control levers with th 3. Set the parking lever to the L 4. Turn the starting switch to th e OFF position, stop the engine, and take out 5.
Lock the cab door, left and ri ght engine side covers, and the battery inspe ction cover. 6. When transporting the mach ine, place wooden blocks under the front a nd rear trac he hold it down with chains or wire rope of a suita ble strength . Be parti cularly careful oes not slip sideways.