. OPERATION COLD WEATHER OPERATION AFTER COMPLETION OF WORK WARNING 3 - 137 Performing idle-runni ng of the tracks is da ngerous, so stay well away from th e track To prevent mud, wate r, or the undercarria ge from freezin g and making it impossible for th e machine to m ove on the following morning, al ways observe the fo llowing precaut Remove all the mu d and water from t he machine bo to prevent damage to the seal caused by mud or dirt on the rod surface gettin g inside th e seal together with drops of water.
Park the machine on hard, dry ground f this is impossible , park the machine on wooden boa The boards help pr otect the tracks fro m being frozen in soil so the m achine can mov e next morning Open the drain val ve and drain any w ater collected in the fuel syste m to pr even t it fro m freezing. After operation in w ater or mud, remo ve water from u ndercarriage a s described belo w to extend undercarriage service life. 1. Swing 90° with en gine at low idling a nd bring the wo rk equipment t o the s ide o f the track. 2. Jack up the mach ine until the track is raised slightly fr om the ground. Rotate the track under no load.
Repeat this h the left and right s AFTER COLD WE ATHER es and the weather becomes warmer, do as follows. When season chang es and the weather becomes warm er, do as follow Change the fuel an d oil in each component to fuel an d oil of the specified viscosity. For details, se e "USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATUR E (PAGE 4-10) ".