. MAINTENANCE SERVICE PROCEDURE clogging fins (1). 4 - 33 CLEAN, CHECK AIR CONDITIONER If th e air conditioner fins become c logged, clean and inspect. Open the engine side cover on the right side of the machine. Use ADJUST IDLER CLEARANCE The idler moves to the front and re ar under external force. When this happens, guide plate (2) bec omes worn. It guide plate (2) becomes worn, the idler will slip to the side or tilt at an angle. This will lead t o the track shoe slipping o r cause uneven wear, so adjust as f ollow s. ADJUSTMENT 1. 2. 3. Trave l on flat ground for 1 to 2 m (39.4 to 78.8 in), then remove cover (3) (both in and out of) o n the side face of the idler.
Measure clearance A (4 plac es: left, right, inside, outside) uide plate. between the track frame and g If clearance A is more than 3 m m (0.118 in), loosen bolt (1), and remove the shim to adjust the clearance to a maximum of 0.5 to 1 mm (0.020 to 0.039 in) on each side. REMARK The thickness of 1 shim is 1.0 mm