Komatsu — CHECK, ADJUST AIR CONDITIONER

. MAINTENANCE SERVICE PROCEDURE CHECK, ADJUST AIR CONDITIONER (Machines equipped with cab) pulley and compressor pulley with a finger force of approx. 6 kg (58.8 N). When the V-belt is new, it will stretch at first, so always adjust it after 2 or 3 days. CHECK LEVEL OF REFRIGERANT(GAS) WARNING 4 - 36 CHECK TENSION OF CO MPRESSOR BELT If t he belt is loose, it wil l slip and will not be able to carry out cooling properly. Check the belt tension from time to time. The d eflection sh ould be 10 mm (0.4 in) when pr essed at a point midwa y between t he drive When handling refri regulations.

gerant gas, always follow local laws and The refrigerant used i n the cooler is colorless an d odorless a nd does not harm the atmosphe re, but if the liquid gets into your eyes or on your hands, it may cause lo of the refrigerant circu ss of sight or frostbite, so never loosen any part it. If t he level of the refrig erant (gas) is low, the c ooling effec t will be reduced. Run the engi ne at high idling, and ch eck the flo refrigerant in the refrig erant circuit through th e sight glas receiver (1) when the c No bubbles in refrig Some bubbles in flo (bubbles pass conti nuously):

Lack of refrige Colorless, transpare REMARK When there are bu bbles, the refrigerant gas level is low, so contact your refrige rant dealer to have refrigerant adde d. If the air conditioner is ru n with the refrigerant gas level low, it will e compressor. s used as the refrigerant. cause damage to th New Freon R134a i s used as the refrigeran