Komatsu — REPLACE FUEL FILTER CARTRIDGE

. MAINTENANCE SERVICE PROCEDURE EVERY 500 HOURS SERVICE Maintenance for every 250 hours should be performed at the same time. REPLACE FUEL FILTER CARTRIDGE WARNING found by opening the engine side cover at with engine oil, then install to 4 - 52 After the engine has been operate d, all parts are at high temperature, so do not replace the filter imme diately. Wait for all parts to cool down before starting the o peration. the engine fuel piping system when the engine is running. High pressure is generated inside When replacing the filter, wait for at least 30 seconds after stopping the engine to let the internal pressure go down before replacing the filter. se.

Do not bring any fire or flame clo NOTICE Genuine Komatsu fuel filter cartri dges use a special filter that has highly efficient filtering ability. When replacing the filter cartridge, always use a genuine K omatsu part. The common rail fuel injection sy stem used on this machine consists of more precise parts than t he conventional injection pump and nozzle. If any part other than a genuine K omatsu filter cartridge is used, dust or dirt may get in and cause pr oblems with the injection system. Always avoid using subs titute parts. When carrying out inspection or maintenance of the fuel system, pay more attention than normal to the entry of dirt.

If dirt is stuck to any part, use fuel to was h it off completely. Container to catch the oil Filter wrench 1. Set the container to catch th The fuel filter is found by the left of the machine. 2. Using a filter wrench, turn filt to remove it. 3. Clean the filter holder, fill the coat the packing surface thi the filter holder. 1. Set the container to catch th NOTICE When adding fuel, do not remove small holes (A) on the dirty side. After adding fuel, remove cap (B) Always fill with clean fuel. Be car the fuel. In particular, center porti cap (B) when adding fuel. Be caref portion on the clean side.