. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING operation. 4 - 61 The oil is at h igh temperature im mediately a fter the machine h as been operated. Wait for the oil to coo l down before starting the Oil replacement am ount: 5 8 liters (15 .31 US ga l) 1. 2. 3. 4. 1. Stop th e machine so that drain plug (3) is direct ly at the bottom. 2. Remov e oil level plug (2 ) and oil fi ller plug (1 ), then remove drain pl ugs (3) an d (4) an d drain th e oil. After draining the oil, tighten the plugs. 3. Add en gine oil to t he specified level through th e hol e in oil f iller plug (1) After fill . ing with oil, check that the oil is at the specified level.
For det ails, see " CHECK OIL LEVE L IN FINAL DRIVE CASE, ADD O IL (PAGE 4-47)". WASH POWER TRAIN CASE BREATHE R Remove th e breather , then w ash it in cl ean diesel oil or flushin g oil to rinse the dirt out fr om insid e. (1 place) Power tr ain case b reather Remove inspection cover ( 2) at the bo ttom right of the operator's seat. Th e breather (1) is in stalled on t he right sid e of the window (rear of machine).