Komatsu — STARTING WITH BOOSTER CABLE

. SAFETY PRECAUTIONS FOR OPERATION 2 - 27 STARTING WITH BOOSTER CABLE If any mistake is made in the method of connecting the booster cables, it may cause the battery to explode, so always do as follows. When starting with a booster cable, carry out the starting operation with two workers (one worker sitting in the operator's seat and the other working with the battery). When starting from another machine, do not allow the two machines to touch. When connecting the booster cables, turn the starting switch OFF for both the normal machine and problem machine. There is a hazard that the machine will move when the power is connected.

Be sure to connect the positive (+) cable first when installing the booster cables. Disconnect the negative (-) cable (ground side) first when removing them. When removing the booster cables, be careful not to let the booster cable clips touch each other or to let the clips touch the machine. Always wear safety goggles and rubber gloves when starting the engine with booster cables. When connecting a normal machine to a problem machine with booster cables, always use a normal machine with the same battery voltage as the problem machine. If any mistake is cables, it may c follows.

When startin tarting operation with two workers (one worke r sitting in the ope rator's seat and the o ther working with the ba When startin machines to t When connec switch OFF for both t he normal machine and problem machine. There is Be sure to con nect the positive (+) cabl e first when installi ng the booster cable s. Disconnect the negativ e (-) cable (groun d side) first when rem When removi booster cable clips touch each other or to let the clips tou ch the machine.

Always wear the engine wit When connec ting a normal machine to a problem machin e with booster cable s, always use a normal battery voltag e as the problem machin For details of the procedure when start ing the machine u sing a booster cable, see "S TARTIN G ENGINE WITH BOOSTER C ABLE (PAGE 3-143)".