. OPERATION EXPLANATION OF COMPONENTS CAUTION MONITOR GROUP CAUTION B(1) Charge monitor CHARGE MONITOR Lamp (1) indicates an abnormality in the charging system while the engine is running. If the monitor lamp flashes, check the V-belt tension. If any abnormality is found, see "OTHER TROUBLE (PAGE 3-146)". REMARK This monitor lamp lights when the ignition switch is turned to ON immediately after the engine is started or immediately before the engine is stopped. It does not indicate an abnormality. 3 - 9 If these caution lamps item flash, check and repair the a ppropriate location as s NOTICE the machine on level ground and check the monitor lamps.
Park the machine o n level ground and check the moni Confirm that monit or lamps light u p about 2 seconds a fter the ignition switch is turned to the ON position. If any monito r lamp does not light, con tact your Komatsu distributor to in spect and repair. These are items wh ich need to be observed when t he engine is running. If any abnormali ty occurs , the item ne eding immediate repair is displayed. If t here is any abnor mality, the abnormal location on the caution l amp will flas