. OPERATION EXPLANATION OF COMPONENTS transmission 3 - 37 JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIF (PCCS lever) This lever (2) is used steer the machine, or carry out counterrotation turns. Forward-reverse sh ifting RD E drive forward; move to the rear to drive in n d to the front or rear, operate the lever partially to the left or right to turn the machine. The ually in the same direction as the lever is operated. fully to the left or right, the machine will turn in a small radius. Position (a): FORWA Position (b): REVERS Position N: Neutral Move to the front to reverse. Steering Position (L): Left turn Position (R):
Right tur With the lever operate d to the front or rear, operate th e lever partially to machine will turn grad ually in the same direction as th e lever is operated If the lever is operated fully to the left or right, the mac hine will turn in a s mall radiu right to turn the machine . The REMARK If the lever is relea sed when steering the machine, t he lever will return to the (a) position or t he (b) positio n and the machine will be returned to straight movement. Gear shifting When the joystick (ste ering, direction, and gearshift lev FORWARD or REVE the transmission. up switch (c): Each ti shifts up down switch (d): Each time the switch is pressed, the tr shifts down one speed range.
For details of the max imum of travel speed for each sp see "SPECIFICATION REMARK When the transmis sion is shifted, the speed range being used i s displayed on th e display pa nel on the m onitor panel. Example: Neutral: N is displa FORWARD 2nd: F REVERSE 3rd: R3 When the parking l yed on the display panel. 2 is displayed on the display panel. is displayed on the display panel. ever is locked, P is displayed. gearshift operation using the shift mode, see SHIFTING GEAR (PAGE 3-98). Shift mode e operation to set the selected speed range beforehand at the N position. 2 is displayed on the display pan is displayed on the display pane ever is locked, P is displayed.
For details of the gearshift operation using the shi 3-98). Shift mode selection means th e operation to set the selected s peed range beforehand at th e N position.