. OPERATION EXPLANATION OF COMPONENTS PARKING LEVER WARNING When the machine is parked, always set the parking lever to the LOCK position. SAFETY LOCK LEVER WARNING 3 - 39 Lever (5) is used to apply the parking brak REMARK Before moving the parking lever to the LOCK position, return the steering, di rectional, and gearshift l ever to the N p osition . When starting t he engine, if the parking lever is not in th e LOCK position, the li mit switch is actuated and it is impossibl e to start the engine. When standing u securely to the L p from the operator's seat, always the safety lock lever OCK position.
rol and ripper control levers are not locked and are ent, it may lead to serious injury or damage. If the blade cont touched by accid ent, it may lead to serious i njury or damage. If the safety lock l ever is not securely to the LO CK position, the lock may not be applied. the position shown in the diagram. e machine or when performing maintenance, always Check that it is in the position shown in the When parking th e machine or when perform lower the blade o r ripper to the ground, then set the safety loc k lever to the LOCK positio n. Safety lock lever ( 6) is a device to lock the blade control and ripper control levers.
When it is set to t he LOCK position, the TI LT, RAISE, LO WER, and FLOAT operati REMARK When starting the engine, to ensure safety , always set th e safety lock lever to the L