Komatsu — FUSE BOX

. OPERATION EXPLANATION OF COMPONENTS REMARK The circuit breaker is a device installed in electric circuits where a large current flows. It is installed to protect the electric circuit. It protects the electric components and wiring from damage caused by an abnormal current in the same way as a normal fuse. After repairing and restoring the location of the abnormality, there is no need to replace the breaker. It can be used again. CIRCUIT BREAKER FOR MAIN POWER SUPPLY If the starting motor is not actuated when the starting motor is turned ON, open the battery cover inspection window at the rear left of the machine and inspect circuit breakers (A) and (B).

(A) and (B) also act as the reset button. If there is a surge of current, the circuit breaker shuts off the circuit to protect the electrical components and wiring from damage. Turn the ignition switcg to the OFF position and reset the circuit breaker. When resetting the electrical circuit after it has been shut off, press the reset button 5 - 10 minutes after the circuit has been shut off. When the electrical circuit has been shut off, the operation of the reset button is heavier than when the circuit is normal.

The height of the reset button is the same, regardless of whether the circuit has been shut off or has been reset, so check the operating effort of the reset button when resetting the circuit. Do not keep the circuit breaker reset button pressed. If the starting motor does not work even when the circuit breaker has been reset, contact your Komatsu distributor. REMARK The capacity of circuit breakers (A) and (B) is as follows. (A): 30A (for regular cab power supply) (B): 105A (for general power supply) 3 - 45 CIRCUIT BREAKER If th e starting does swit ch is turne d to the O N position, o pen t he recirculat ed air fi lter cove r.

If ex cessive c urrent flo ws through th e circuit breaker, it cuts off the electric circuit t o prevent damage to the electrical g. circuit after it has been cut off, push in amage components and wirin To r estore th e electric circui rese If th t button ( e electric 3). (This circuit is springs normal, out w reset hen the button ( circuit is 3) will sta cut off.) y pushed in. I f it comes out immediately when it is pushed in, t he electric circu it must b e checke d. No Fuse capacity Circuit (1) 20A Starting switch (2) 20A Air conditioner