4. PUTTING THE TRACTOR INTO SERVICE 4.5 RENEWAL OF THE INFOCENTER 4.5 RENEWAL OF THE INFOCENTER Whenever the INFOCENTER is renewed, the technician must configure the operating parameters (constants). Configuration is needed in order to inform the Infocenter of the values that must be used for the purposes of displaying data (units of measure, and language of choice for alarm messages). 4.5.1 ENTERING CONSTANTS 1 - Connect a portable computer with the EDS program installed (for details see «Connection of a portable computer with "EDS" software to the transmission control unit»). 2 - Turn the starter key to the “I” (ON) position and start the EDS program.
3 - From the introductory menu, start the Infocenter diagnosis program by pressing key “4” or “5”, depending on which port the cable is connected to.. 4 - When the introductory page of the program appears, press “F1” to initiate the procedure of entering the operating constants. 20-39