5. ALARMS 5.4 LIST OF FRONT AXLE SUSPENSION CONTROL VALVE ALARMS 5. ALARMS 5.4 LIST OF FRONT AXLE SUSPENSION CONTROL VALVE ALARMS The suspension control unit warns the operator of any malfunction affecting monitored components, by way of an indicator light in the pushbutton. Faults are indicated using a system of coded flash sequences which, depending on how the control unit has been con- figured, will either specify the precise nature of the fault (extended alarm) or simply identify the device affected (standard alarm).
To verify, using the ART, whether or not an alarm detected is “active”, the technician must cancel all the alarms, turn the starter key to the “ O ” (OFF) position, then make a fresh connection to the control unit. All alarms with the exception of those indicated by the light incorporated into the pushbutton (Alarms 21 and 22) have the effect of deactivating and inhibiting the system completely. 5.4.1 LIST OF ALARMS BY TEXT CODE 20-161 Extended flash Standard flash Display on ART Description Page 11 11 As. SV Fa. or NC The control unit detects that the front axle 'up' valve solenoid is not connected 20-164 12 12 De. SV Fa.
or NC The control unit detects that the front axle 'down' valve solenoid is not connected 20-165 13 13 LS. SV Fa. or NC The control unit detects that the front axle load sensing valve solenoid is not connected 20-166 15 15 PO. SE. Fa. or NC The control unit detects that the front suspen- sion position sensor is disconnected. 20-167 16 16 PW. S. Fa. or NC The control unit detects that the power input to the front suspension position sensor is not cor- rect. 20-168 17 17 Battery V. High The control unit has detected that the battery voltage is too high. 20-169 19 19 Battery V. Low The control unit has detected that the battery voltage is too low (less than10V). 20-170 21 21 SC LAMP Ind.
The control unit has detected that the activation and faults indicator light is short-circuiting. 20-171 22 22 LAMP Ind. Disc. The control unit has detected that the activation and faults indicator light is burnt out or discon- nected. 20-172 24 11 ALL. CC EV UP The control unit detects a short circuit in the con- trol line of the front axle 'up' solenoid. 20-173 25 12 ALL. CC EV DW The control unit detects a short circuit in the con- trol line of the front axle 'down' solenoid. 20-174 26 13 ALL. CC EV LS The control unit detects a short circuit in the con- trol line of the front axle load sensing solenoid. 20-175