Deutz — 4.2 CONSTANT VALUES FOR INFOCENTER

EDS (Electronic Diagnosis System) DIAGNOSIS OF THE INFOCENTER The realized changes from the item “F1=change constant values” are saved. Changes like “Move pointer to position” etc. are rejected and a self-test of the INFOCENTER will be performed. Subsequently the EDS initial menu reappears (compare part A 1.3 “Launching and terminating of the EDS program”). 4.2 CONSTANT VALUES FOR INFOCENTER Every INFOCENTER is programmed with 14 constant values in order to take into account the design features of the tractor, which can be, e.g. Indication of the ground speed in km/h or mph Indication of the power take-off speed Radar sensor:

existing or not existing The central unit needs to be programmed with a specific progression of constant values which determines the type of trac- tor and the design features. Every progression of constant values has a running number (K...) which is unique. NOTE. Upon calibration (traveling the 100 m distance) the constant values 9 and 10 will be newly determined. The constant values are displayed by the central unit upon the following conditions: Ignition OFF; dipped beam OFF Pull the main beam switch and hold it Switch ON the ignition After approx.

10 sec the constant values are flashing and can thus be read; Release the main beam switch Return to normal indication by means off ignition OFF-ON The number of the constant value is indicated in the “speed” display and the value is indicated in the “Operating-hours” dis- play. K1 - Theoretical ground speed above 15 km/h K2 - Rear power take-off K3 - not occupied K4 - Front power take-off 100 rpm Upon later up-grading of the front power take-off K4 does not need to be programmed.

K5 - Operating-hours K6 - (Gear ratio engine – electric generator) engine speed K7 - C onstant value for the true ground speed (radar sensor) above 15 km/h K8 - Determination of km/h or mph, language, radar sensor existing/not existing K9 - Theoretical ground speed below 15 km/h. Determined by calibration (traveling the 100 m distance) K10 - True ground speed (radar sensor) below 15 km/h. Determined by calibration (traveling the 100 m distance) K11 - not occupied K12 - Rear power take-off K13 - not occupied K14 - not occupied 20-232