SERDIA MEASURED VALUES 3.3 DATA LOGGER (ONLY EMS2) The screen for this menu item can only be selected if an EMS2 has been selected as the control unit. 3.4 INPUT/OUTPUT ASSIGNMENT The inputs and outputs can be configured. This menu item displays the current input and output assignment. Limitation : EMR1 and EMS2 control units only. 3.5 CAN STATUS This window displays the CAN bus activities of the EMR1 or EMR2. EMR1 EMR2 Sent : Contains the information Can:TxCounter (0 to 65535, word). The value is increased with every CAN send mes- sage and displays the sending activity of the EMR1. Received : Contains the information Can:RxIrCounter (0 to 65535, word).
The value is increased with every CAN send message and displays the sending activity of the EMR1. Bus off : Counter indicating how often the EMR1 has disconnected from the CAN bus because of continuous errors (CanBusOffCounter 0 to 255, bytes). Status : CanOnline indicates whether the EMR1 is active on the CAN bus. A value 1, for online and a value 0, for offline, is sent via the ISO 9141 interface. The SERDIA program displays the text "online" (for value 1) or "offline" (for value 0). 20-280