Deutz — Removal

ENGINE HOOD AND LAMP ASSEMBLIES ENGINE HOOD AND LAMP ASSEMBLIES Removal 4 1. Removal of the hood 1 - Raise the hood (1) fully. 2 - Disconnect the screen washer pipe (2). 3 3 - While keeping the hood in the raised position, remove the cotter pins (3) and the washers (4). 1 2 F0043710 4 - Detach the gas springs (5) from the frame and remove the complete hood assembly (1). 5 5 1 F0043720 1.1 Adjustment of the hood latch Before adjusting the hood latch, make sure that the hood release buttton is fitted and that the gas springs are disconnected.

11 10 9 1 - Check that the spring (6) is engaged with the plate (7) of the release button (8) and check that when the hood gasket (9) comes to rest on the frame, the spring (6) en- gages the groove on the striker (10). If necessary, adjust the depth of the striker by way of self-locking nut (11). 6 8 7 D0003920 2. Removal of the side panels 1 - Lift and remove the grilles (12). 12 F0043730 30-7