Deutz — Renewal and tensioning

ALTERNATOR DRIVEBELT 9 - Using the same method, fit the new drivebelt (15) for the alternator (16) and tension using a “ T ” bar and a 3/4” extension, or a 3/4 angle bar” inserted in the seat machined in the fuel lift pump support (17). 15 17 13 10 - Tension the drivebelt by turning the bar clockwise and then tighten down bolts (13) and (14). 14 16 F0078103 11 - To check that the tension is correct, use the tool and procedure indicated in the engine manual. Static deflection ” A ” immediately after fitting: 13 mm belt : 450±50 N Static deflection” A ” after 15 minutes: 13 mm belt : 300±50 N The check should be carried out with the en- gine cold.

A F0077882 12 - Fit and tension the fan drivebelt. ( For details, see "FAN"). 13 - Fit and tension the air compressor drivebelt (4). ( For details, see "COMPRESSOR DRIVEBELT"). 4 14 - Complete the refitting procedure by following the first steps of the removal procedure in reverse or- der. F0077902 30-28