Deutz — Refitting

EXPANSION TANK EXPANSION TANK Removal 3 1 - Partially drain the engine cooling system. 5 3 Coolant: approx. 10 (2.64 US. gall.) For 4-cylinder models 2 - Disconnect the pipe (1) and remove the retaining nut (2) of the tank (3). 1 2 For 6-cylinder models Disconnect the pipe (4) on the left-hand side and re- move the pin (5) securing the tank (3). 4 F0044290 3 - Disconnect the pipes (6) and (7) on the right-hand side. 4 - Unscrew and remove the nut (8) and washer (9). 8 9 7 6 F0078250 5 - Loosen and remove the bolt (10) and the washer (11). 3 6 - Remove the expansion tank (3). 10 11 Refitting F0078260 Refitting is the reverse of removal. 1 - Fill the engine cooling system. Coolant:

approx 10 (2.64 US. gall.) 2 - Start the engine and run for a few minutes to allow the coolant to circulate. 3 - Stop the engine, check the level in the expansion tank and top up if necessary. 30-49