COMPLETE RADIATOR/COOLERS ASSEMBLY For all versions 16 - Attach a hoist (26) to the complete assembly. Assembly: 28 kg (61.7 lb.) 26 F0044423 17 - Remove the front retaining bolts (27), (28) and remove the complete assembly (26). 27 Refitting 28 Refitting is the reverse of removal. 1 F0078281 Remove the plugs and immediately connect the pipes, fully tightening the fittings, to prevent mois- ture from getting into the system. Check the condition of the seals and renew them if damaged. 2 Carefully check the condition of the O-ring seals on the pipes; if in the least doubt about the con- dition of these parts, fit new ones. 1 - Flush and recharge the air conditioning system.
(For details, see "AIR CONDITIONING SYSTEM - Dis- charging, flushing and recharging"). 2 - Fill the engine cooling system with coolant. Mod. 105 17.5 Coolant: US.gall. 4.62 3 - Start the engine and run for a few minutes to allow the coolant to circulate. 4 - Stop the engine, check the coolant level in the expan- sion tank and top up if necessary. 30-54 80 90 100 15.5 15.5 15.5 4.10 4.10 4.10