Deutz — Assembly

POWER STEERING UNIT 5 - Align the springs (23) and position them centrally rel- ative to the diameter of the outer sleeve (17b). 23 F000 9720 17 b 6 - Fit the ring (22) on to its seating on the outer sleeve (17b). The ring (22) must rotate freely without interfer- ence with the springs (23). 22 F000 9730 17 b 7 - Insert the trim pin (16). 16 F000 9740 8 - Fit the thrust bearing parts in the order indicated in the assembly diagram in point 9. 20 22 F000 9751 21 30-87