LIFT VALVE BLOCK LIFT VALVE BLOCK Removal Fully lower the lift and switch off the engine. 1 1 - With the control levers (1), (2) in the horizontal position, label the lower pipes (3) and disconnect them from the valve block (4). Label the pipes to avoid confusion on reconnec- tion. 2 4 3 F0017940 2 - Disconnect the rigid upper pipes (5), (6). Plug the ends of the pipes to prevent the entry of contaminants. 5 6 4 F0018680 3 - Unscrew the bolts (7) and remove the valve block (4) with the rear spacers (8). 4 8 7 F0018710 Refitting Refitting is the reverse of removal. 30-99