Western Star — Western Star (EN)

Steering System Power Steering System ing wheel spokes should be at the 3 o’clock and 9 o’clock positions or within 10 degrees of these posi- tions. See Fig. 13.1 . The power steering system includes the integral power steering gear, hydraulic hoses, power steering pump, reservoir, steering wheel and column, and other components. Some models are also equipped with a separate hydraulic power cylinder on the right side of the front axle, or a right-hand slave gear. The power steering pump, driven by the engine, pro- vides the power assist for the steering system. If the engine is not running, there is no power assist.

If the power-assist feature does not work due to hydraulic fluid loss, steering pump damage, or some other cause, bring the vehicle to a safe stop. Do not drive the vehicle until the cause of the problem has been corrected. 10 10 1 2 10 10 WARNING Driving the vehicle without the power-assist fea- ture of the steering system requires much greater effort, especially in sharp turns or at low speeds, which could result in an accident and possible injury. 06/06/2003 f461970 1. 9 o’Clock 2. 3 o’Clock Fig. 13.1, Steering Wheel Centered NOTICE Never steam clean or high-pressure wash the steering gear. Internal damage to gear seals, and ultimately the steering gear, can result.

Drivers should carefully use the power available with a power steering system. If the front tires become lodged in a deep chuckhole or rut, drive the vehicle out instead of using the steering system to lift the tires out of the hole. NOTICE Avoid turning the tires when they are against a curb, as this places a heavy load on steering components and could damage them. An optional power steering fluid cooler mounted in front of the radiator or behind the cab is available. Certain applications may limit or require the use of a power steering fluid cooler. Steering Wheel Adjustment When there is no load on the vehicle and the front tires are pointed straight ahead, the standard steer- 13.1