Western Star — Western Star (EN)

Drive Axles turning radius will increase because the vehicle understeers. See Fig. 16.3 . Interaxle Lock Switch The interaxle lock switch allows the driver to lock the drive axles together. See Fig. 16.4 . A B 02/09/96 f350079a A. Turning Radius When the Differential Lock is Engaged (understeer condition) B. Turning Radius When the Differential Lock is Disengaged Fig. 16.3, Turning Radii 07/22/2011 f545802 4. Press the lower half of the differential lock switch to disengage the differential lock after leaving poor road conditions. Fig. 16.4, Interaxle Lock Switch NOTE: If the differential lock is engaged when the engine is shut down, the differential lock will disengage.

Interaxle Lock Operation NOTICE The interaxle lock should not be engaged on a vehicle with obviously spinning wheels. Engage- ment at high speed or power can damage the axle(s). 5. If the vehicle is moving, briefly let up on the ac- celerator to allow the wheels to fully unlock, then resume driving at normal speed. Interaxle Lock 1. With the engine running, press the upper half of the interaxle lock switch to engage the interaxle lock. Do not wait until traction is lost and the tires are spinning before engaging the interaxle lock. The interaxle lock (axle lock, interaxle differential lockout) feature is available on vehicles wth tandem- or tridem-drive axles.

The interaxle lock causes the drive axle shafts to rotate together, and is recom- mended for use under adverse road conditions where greater traction is needed. 2. If the vehicle is moving, briefly let up on the ac- celerator until the interaxle lock engages. NOTICE See the axle manufacturer’s website for more infor- mation. Do not operate the vehicle continuously with the interaxle locked during extended good road con- ditions. To do so could result in damage to the axle gearing and excessive driveline and tire wear. When engaged, the interaxle lock essentially makes the driveshaft a solid connection between the drive axles.

Power entering the forward drive axle is trans- mitted straight through to the rearmost axle(s). Drive- line torque is now delivered equally and the drive axles, and wheels, turn together at the same speed. The interaxle lock increases drivetrain and tire wear and should be used only when improved traction is required. 3. Proceed over poor road conditions with caution. 4. Press the lower half of the interaxle lock switch to disengage the interaxle lock after leaving poor road conditions. 16.2