Trailer Couplings Air-Suspension Dump Valve ( www.premier-mfg.com ) for complete safety, operation, and maintenance instructions. WARNING Trailer couplings are attached to the rear closing crossmember. The Premier trailer couplings ( Fig. 18.2 ) are designed for use with trailers having a maximum gross weight of 100,000 lbs (45 455 kg). Never exhaust air from the suspension while driving. The suspension will not absorb road shocks, possibly damaging components, and ve- hicle handling may be compromised. This could result in loss of vehicle control, possibly result- ing in severe personal injury or death.
The Premier 2200 and 2400 trailer couplings are air- adjusted couplings with a rigid pintle hook. An air chamber mounted forward of the coupling operates a push rod, which pushes against a shoe inside the coupling. The shoe maintains constant pressure on the eye of the trailer drawbar when it’s over the pintle hook. This takes up any slack in the trailer connec- tion, providing smoother towing and less wear on the pintle hook. The air pressure is activated when the trailer brakes are released. The air-suspension dump valve may be used to ad- just the vehicle height in order to aid with coupling to or uncoupling from a trailer. See Fig. 18.1 .
When the switch is set to DOWN, the air-suspension dump valve deflates the air springs to lower the rear of the vehicle. In the UP position, the automatic ride-control valves operate for normal driving. Trailer Hookup 1. Chock the front and rear tires of the trailer. 2. Push the latch lock towards the mounting plate as far as possible. Then, while holding the latch lock in place against the mounting plate, pull the top of the latch as far as possible toward the pintle hook. 3. While holding the latch in place, release the latch lock. 4. Back the vehicle up until the drawbar eye is over the pintle hook, then lower the trailer. 5.
Pull the top of the latch as far as possible toward the pintle hook. Then, while holding the latch in position, push the latch lock towards the mount- ing plate. 07/22/2011 f545805 Fig. 18.1, Air-Suspension Dump Valve 6. While holding the latch lock in place against the mounting plate, release the latch. NOTICE 7. Release the latch lock and make sure it is fully seated in the slot on top of the latch. Do not operate the vehicle over uneven ground such as ramps, speed bumps, curbs, etc. with the air springs deflated. Doing this may lead to air bag separation from the piston, preventing the suspension air springs from inflating.
NOTICE Always make sure the connection hanger keeps the trailer air hoses and electrical cables posi- tioned so that they do not rub on anything. Rub- bing may wear through hoses or cables, resulting in air leaks, or exposed or broken wires, poten- tially affecting trailer brake or electrical systems. Premier Trailer Couplings General Information IMPORTANT: Before operating the Premier cou- pling, refer to the Premier website 8. Connect the trailer’s electrical and air lines. 18.1