Western Star — Western Star (EN)

Seats and Restraints Seats, General Information Lumbar Support changes the shape of the backrest to give more or less support to the occupant’s lumbar (lower back) area. This ad- justment is either mechanical or air controlled, depending on the seat model. Unless otherwise noted, all seat adjustments should be made while seated and before the engine is started. Due to the high degree of adjustability of mid- and high-back air suspension seats, it is possible to com- bine the seat back recline adjustment and the seat slide adjustment so that the seat back contacts the back wall. Use care when adjusting the seat to pre- vent damage to the seat and the cab interior.

Isolator feature reduces the amount of road shock by isolating the occupant from the mo- tion of the vehicle, and allowing the upper seat to move in a simple pendulum motion. A lock- out feature is used whenever the isolator is not desired. WARNING Height Adjustment moves the entire seat up or down. The adjustment is either manually- or air-controlled, depending on the seat model. Keep hands, tools, and other objects away from the scissor points under the seats. Failure to do so could cause personal injury. Bottom Cushion Angle (fore-and-aft bottom cushion height) enables the occupant to raise or lower the front or back of the bottom cush- ion.

This adjustment is easier to perform when all weight is removed from the seat. The following is a description of adjustments that can be made to various Western Star seats. Not all seats have all of the adjustments listed below. See Fig. 6.1 . Fore-and-Aft Seat Slide (seat track adjustment) moves the entire seat forward or backward on its track. Backrest Tilt enables the backrest to pivot for- ward or backward. 1 8 5 10/26/2000 f910149a 1. Backrest Tilt 2. Lumbar Support 3. Isolator 4. Height Adjustment 5. Bottom Cushion Angle (fore-and- aft cushion height) 6. Fore-and-Aft Seat Slide (seat track adjustment) 7. Seat Tilt 8. Headrest Adjustment Fig. 6.1, General Seat Adjustments 6.1 4 6 3 7