Seats and Restraints Height Adjustment ate with the key in accessory mode. Optimized Idle may also turn seat heating off to reduce stress on the batteries. To raise or lower the height of the seat, use the height adjustment switch on the side of the seat. Bostrom Seat Bottom Cushion Extension See Fig. 6.3 for Bostrom seat adjustment controls. To adjust the fore-and-aft position of the seat cush- ion, remove your weight from the seat, then lift up and pull forward on the cushion adjustment handle. To return the cushion to the aft position, lift up and push rearward.
Fore/Aft Seat Slide To adjust the fore-and-aft position of the entire seat, move the fore-and-aft seat adjustment lever to the left and slide the seat forward or backward to the desired position. Move the lever back to its original position to lock the seat in place. 1 6 Fore/Aft Isolator To engage the isolator, turn the isolator knob rear- ward to the unlocked position. Turn the isolator knob forward to the locked position when the isolator fea- ture is not desired. 5 2 3 4 Shock Absorber 12/03/2010 f910131a 1. Backrest Tilt Lever 2. Lumbar Support Switches (LSO models) 3. Height Adjustment Switch 4. Bottom Cushion Tilt Knob 5. Isolator and Fore/Aft Seat Slide Lever 6.
Lumbar Support Knob (non-LSO models) To adjust the amount of damping the shock absorber provides, move the lever up to increase damping; move the lever down to decrease damping. Front Cushion Height To adjust the height of the front of the cushion, re- move your weight from the seat, then turn the adjust- ment knob toward the front of the seat (clockwise) to increase cushion height. To lower the cushion height, turn the adjustment knob toward the rear of the seat (counterclockwise). Fig. 6.3, Bostrom Seat Adjustment Controls Backrest Tilt To tilt the backrest, lean forward slightly to remove pressure from the cushion and hold the backrest tilt lever rearward.
Lean forward or backward slowly to the desired position and release the lever to lock the backrest in place. Rear Cushion Height To adjust the height of the rear of the seat cushion, remove your weight from the seat and turn the rear cushion adjustment knob to one of three positions. Lumbar Support To increase lumbar support on luxury seat option (LSO) models, press the plus sign on the lumbar support switch. To decrease lumbar support, press the minus sign on the switch. Heater To turn on the heat option, press the button. To turn off the heat option, press the button again.
If the ve- hicle has Optimized Idle, seat heating will not oper- To increase lumbar support on non-LSO models, ro- tate the lumbar support knob forward. To decrease lumbar support, rotate the knob rearward. 6.3