Western Star — Western Star (EN)

Cab and Sleeper Features Electronic Device Mount NOTE: See Chapter 5 for detailed information regarding sleeper climate controls and the digi- tal clock. Some vehicles may be equipped with an optional electronic device mounting station and 12 volt outlet on the dash. The standard bolt pattern allows the mounting of a variety of devices including navigation systems, cell phone holders, portable music players, and other electronic devices. Mounting systems can be found at www.ram-mount.com . Baggage Compartment Doors To unlock, insert the baggage door key in the lock and turn counterclockwise 1/4-turn. Push the button, and the latch will spring open.

To lock, press the latch in, turn the key clockwise 1/4-turn, then remove the key. If the baggage compartment door is un- locked, it can be opened simply by pushing the button. Lighting See Chapter 4 for detailed information regarding lighting controls. Storage Areas Lighting There is a storage bin located on the right-hand side of the overhead console ( Fig. 7.7 ). This storage bin has an elastic mesh cover to keep objects in place. Some vehicles have an elastic-topped pouch, located on the rear cab panel between the seats. If the ve- hicle has a passenger bench seat, there are storage areas on the front of and inside the seat base. Reading lamps are operated manually with a rocker switch.

The light beam direction is adjustable by moving the lens assembly in the desired direction. There are other courtesy lamps provided in the sleeper. These will operate when a cab door is opened. Some sleepers have light switches located on the cab or sleeper instrument panels. Remote Engine Start The remote engine start option ( Fig. 7.8 ) includes a key switch, ignition light, CHECK engine warning light, and a STOP engine warning light. To activate the sleeper start controls, turn on the sleeper start switch on the dash, then turn the sleeper key switch to ON. Return the engine control to the cab by first turning the cab key switch ON and set the sleeper start switch to OFF.

1 2 Sleeper Door The sleeper door is not intended for entry or exit. The door is intended only as a convenient means to stow or remove personal belongings in the sleeper area. To open the sleeper door, reach behind the latch cover at the rear upper corner, locate the flat handle, and push down. 3 03/21/2001 f610480 1. Double Reading Lamp (optional) 2. Storage Bin 3. Single Reading Lamp (optional) IMPORTANT: The sleeper doors are two-stage latching. When closing the doors, ensure that they are completely latched to prevent wind noise and water intrusion. Fig. 7.7, Overhead Console Area Sleeper Amenities Western Star sleepers are available with many op- tional features.

The following are some of those options. 7.3