Doosan DX225LC-3 — 14. Air Compressor Switch (Optional)

13. Quick Coupler Switch (Optional) O I This switch is used for securing or releasing the attachment. O. In this position , the quick coupler is "LOCKED". The attachment is secured to the quick coupler. I. In this position , the quick coupler is "UNLOCKED". The attachment is released from the quick coupler. NOTE: To move the switch, pull up on the toggle and then move it into "UNLOCK" position. FG023340 Figure 23 WARNING AVOID DEATH OR SERIOUS INJURY DO NOT OPERATE machine and attachment if quick coupler switch is in "I" ( ) position. Attachment can fall off causing death or serious injury. 14. Air Compressor Switch (Optional) This switch is used to activate the air compressor system. O I O.

The switch is automatically returned to this position when the switch is released. II I. In this position, the air compressor system is turned "OFF". II. In this position, the air compressor system is turned "ON". FG018273 Figure 24 IMPORTANT To prevent air compressor motor from overheating, do not run it or attempt to run it for more than 30 continuous minutes. If the air compressor motor runs for more than 30 continuous minutes, the system will automatically shut off. DX225LC-3 Operating Controls 2-14