Component Model and Serial Numbers There are model and serial numbers on each traceable component of machine. For example, the engine serial number is stamped on rear left side of the engine block, above the starter. Additional engine information is described on a label (Figure 3) on head cover. Record these numbers and their locations. These will be required whenever warranty or service work is requested. FG019408 Figure 3 Safety Messages Safety messages and safety decals included in this manual and on the machine provide instructions how to operate, service and maintain the machine.
Safety messages and safety decals indicate potential hazards and describe safety precautions required to avoid hazards. Operator and maintenance personnel should read and understand these safety messages and decals before beginning operation or maintenance. SAFETY ALERT SYMBOL Be Prepared - Get to Know All Operating and Safety Instructions. This is a Safety Alert Symbol. Wherever it appears in this manual or on safety decals on the machine, you must be alert to the potential for personal injury or accidents. Always observe safety precautions and follow recommended procedures.
Signal Words The signal words "DANGER", "WARNING", "CAUTION" are used throughout safety messages and safety decals in this manual or on the machine. They indicate an existence of, and the relative seriousness of, a hazard. All three indicate that a safety risk is involved. Observe the precautions indicated whenever a Safety Alert Symbol is present, no matter which signal word appears next to it. DANGER DANGER - This signal word is used on safety messages and safety labels and indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Foreword 0-3 DX225LC-3