Doosan DX225LC-3 — 9. Function Buttons

9. Function Buttons The function buttons has the same functionality as that of a jog switch. H H PM How to Use Function Button E F Pressing function button will display "Function Bar" at bottom of screen. s DIG USB C C rpm For symbols on function bar, commands can be entered using buttons F1 - F6 in the same positions. ENTER ESC Figure 82 FG018129 1. Menu 2 Selector Button Press this button to change from menu 1 to menu 2. Menu 1. 1 2 3 4 2. Power Mode Selector Button Used for selecting the power plus mode, power mode, standard mode, or the economy mode. Menu 2. Pressing the power mode selector button will display the available modes on the main window.

Place the selection bar by selection bar move button (5, 6) and select the mode by pressing menu selector button (7). 5 6 7 8 9 10 3. Auto Idle Selector Button Figure 83 FG018652 When the auto idle system is activated, the engine will automatically reduce speed to "IDLE" approximately four (4) seconds after all the control levers are in the "NEUTRAL" position. This system is designed to reduce fuel consumption and noise. When the auto idle selector button is pushed to "ON" position, an indicator light above it turns "ON".

DX225LC-3 Operating Controls 2-36 Reference Number Description 1 Menu 2 Selector Button 2 Power Mode Selector Button 3 Auto Idle Selector Button 4 Work Mode Selector Button 5 Selection Bar Move ( ) Button 6 Selection Bar Move ( ) Button 7 Menu Selector Button 8 Camera Mode Selector/Escape (ESC) Button 9 Entertainment Button 10 Menu 1 Selector Button POWER WORK F1 F2 F3 F4 ENTER F1 F2 F3 ESC F4 F5 F6