DX225LC-3 Operating Controls 2-42 Warning Pop-up Windows List Warning Description 1 Charge Check the battery charging system. 2 Low E/G Oil Pressure Check the engine oil system. 3 Coolant Overheat Coolant is overheated. Service/repair the cooling system after fully cooled down. 4 Preheat Being preheated. 5 E/G Warning Check the engine system. 6 Water in Fuel Drain the water in the fuel filter. 7 Hydraulic Hydraulic oil is overheated. Service/repair the oil system after fully cooled down. 8 Fuel Empty Refuel. 9 Air Cleaner Clogged Air cleaner is clogged. Check the air cleaner. 10 Return Filter Return filter is clogged. Check the return filter. 11 Pilot Filter Pilot filter is clogged.
Check the pilot filter. 12 Brake Oil Pressure Low Brake oil pressure is too low. Check the brake system. 13 Quick Coupler Quick coupler is disengaged. Check attachment. 14 Overload Warning Device (OWD) Check for and follow all applicable laws and regulations when lifting objects. 15 Diesel Particulate Filter (DPF) Regeneration Status Start forced regeneration. 16 Active Regeneration Inhibited DPF active regeneration inhibited status. 17 Auto Regeneration Auto regeneration status. 18 Forceful Regeneration Forceful regeneration status. 19 Engine Stop Stop engine and service the emission control system immediately.