The filter/oil use time shows the hours of operation after initializing the engine. It begins again with 0 hr after initialization the following the replacement of filter/oil. Filter/Oil Information FG018485 Figure 101 With the selection screen being displayed on clear, turn the jog switch counterclockwise to display the selection screen on the replacement period. Filter/Oil Information Click on the jog switch to change the selection screen to a flickering state. Then, turn the jog switch counterclockwise to reduce the period. Turn clockwise to extend the period. With the replacement period change being completed, click on the jog switch to create a pop-up window to select the period change.
Turn the jog switch to locate it at YES. Then, click on the jog switch to change the replacement period. Figure 102 FG018486 Turn the jog switch to locate it at NO. Then, click on the jog switch to allow the pop-up window to disappear without the replacement period not being changed. Filter/Oil Period Setup Table Unit: time (hr) Operating Controls 2-45 DX225LC-3 Fuel Filter TIME: 50h CHANGE: 500h REMAIN:450h TIME: 50h CHANGE: 500h REMAIN: 450h 10% Reset OperAairt iColena nHerour? CLEAR TIME: 74h CHANGE: 1600h REMAIN: 1526h 5 Engine Oil Filter % CLEAR TIME: 74h CHANGE: 5 00h RE MAIN: 15% 426h CLEAR Return Filter TIME: 74h CHANGE: 1000h REMAIN:926h 1000h REMAIN:926h Fuel Filter TIME:
50h CHANGE: 500h REMAIN:450h TIME: 50h CHANGE: 500h REMAIN: 450h 10% Change PeAriiro Cdle?aner CLEAR TIME: 74h CHANGE: 1600h REMAIN: 1526h 5 Engine Oil Filter % CLEAR TIME: 74h CHANGE: 5 00h RE MAIN: 15% 426h CLEAR Return Filter TIME: 74h CHANGE: 1000h REMAIN:926h 1000h REMAIN:926h Kind Replacement Period Basic Setup Value Minimum Available Setup Value Change Value By Step Fuel filter 500 100 50 Air cleaner 2,000 1,000 50 Engine oil filter 500 100 50 Return filter 1,000 100 50 Pilot filter 500 100 50 Engine oil 500 100 50 Hydraulic oil 2,000 1,000 50 Coolant water 2,000 1,000 50 DPF 4,500 100 50