Doosan DX225LC-3 — User Menu - Access and Escape Methods

A. Attachment Select (Optional) The attachment select screen is used to select attachments among the already setup available attachments. Attachment Select Breaker Two Way At the vehicle configuration, if the cursor is placed on the attachment select, click on the jog switch to access the attachment select screen. Press the ESC button to return to the previous screen. FG020156 Figure 111 How to Select Attachments When you access the attachment select screen, the initial screen locates the cursor at breaker/two-way at the top. Attachment Select Breaker Two Way Operate the jog switch clockwise/counterclockwise to select breaker/two-way.

Then, click on the jog switch to move the cursor to the selectable lists. When the cursor is placed on the list, operate the jog switch clockwise/counterclockwise to move the cursor. Then, click on the jog switch to select attachments to use. Figure 112 FG020156 When the selection is completed, the "Select Complete!" pop-up window is displayed for 3 seconds, and the checkbox of the selected list is updated. Attachment Select Breaker The cursor can only be moved from the selectable lists. The selectable list items at the attachment setting are set as "Enable" in the use or non-use of attachments in the attachment setting. Figure 113 FG020153 B.

Attachment Setting The attachment setting screen is used to set up the use or non-use of attachments, max. engine limit, and max. attachment flow rate, etc. Vehicle Configuration At the vehicle configuration, when the cursor is placed on attachment setting, click on the jog switch to access the attachment setting list screen. Attachment Select Attachment Setting Camera Setting Jog Shuttle for Dial If the system is set up as the owner's password locked, Access the attachment setting list screen by using owner's password input screen. s DIG ISO USB Figure 114 FG018493 DX225LC-3 Operating Controls 2-48 Select Complete!